Diffuser
A continuous luminous face for general lighting. Ask which PC diffuser is available for the selected fixture.
Architectural lighting / Linear collection
Explore straight, circular and curved LED fixtures for offices, reception areas and commercial interiors. Compare mounting options, optics and aluminum profiles.
01 / Featured fixture
Use the same rectangular fixture for suspended or surface-mounted layouts. Inner and outer joints support continuous straight runs.
02 / Linear optics
Choose the optical layout and the mounting method separately. The catalog examples below show suspended and recessed installations with lens modules and continuous luminous sections.
A continuous luminous face for general lighting. Ask which PC diffuser is available for the selected fixture.
A row of individual optics for directing light onto a work surface. Confirm the beam distribution for the selected model.
Pairs lens modules with diffused sections in the same run. Mark where each section is needed on the lighting plan.
Catalog configuration examples. Confirm the fixture model, optical sections and mounting hardware for each run before requesting a quote.
03 / Aluminum profile kits
Start with the ceiling detail. The catalog pairs exposed channels with flanged recessed profiles. Confirm the actual cutout, diffuser and mounting hardware before ordering.
35 × 35 mm overall W × H
35 mm body width
50 × 35 mm overall W × H
50 mm body width
50 × 35 mm overall W × H
35 mm body width
65 × 35 mm overall W × H
50 mm body width
Recessed overall widths include the flange. Use the approved installation drawing to confirm the ceiling cutout. For these aluminum profile kits, confirm the LED, driver and hardware configuration separately.
04 / Mounting & connections
Mark each start, end and change of direction on your drawing. Confirm the joint, power feed and mounting method with the selected fixture or profile.
Hardware examples from the 2025 aluminum profile catalog, PDF page 30. Ask VOC to confirm compatibility with your selected model.
For workstations and meeting tables, mark the desired drop and ceiling fixing points.
For corridors or ceilings with limited cavity depth, confirm the mounting surface and cable entry.
For integrated ceiling lines, check the flange width, actual cutout and available depth before closing the ceiling.
Have a run layout? Send the segment lengths, joint locations and mounting details for review.
Request a project quote05 / Specification questions
For a project quote, mark the ceiling type, mounting height, segment lengths and dimming protocol on your drawing or BOQ.
Yes. ZG-5575 supports inner and outer joints. Send the segment lengths and feed locations so VOC can confirm the correct hardware and electrical configuration.
The product page lists 36 W for the 1205 × 55 × 75 mm configuration. Confirm wattage for the 600 mm and custom-length versions when requesting a quote.
DALI is an optional configuration. Specify DALI in the quote request so VOC can confirm the driver and control configuration.
The ZG-5575 product specification lists up to 110 lm/W, a color rendering index of Ra ≥ 82 and an IP20 rating.
The exposed 5035 is 50 mm wide. The recessed 3535A has a 35 mm body and a 50 mm overall width including its flange. Confirm the cutout from the installation drawing.
06 / Architectural shapes
Use a circular lens fixture to define a seating area, or develop a continuous diffused shape from a reflected ceiling plan for a reception, lobby or shared space.
Circular lens fixture
Available for suspended or surface mounting. Specify each ring as a standalone fixture.
| Diameter | Power |
|---|---|
| Ø600 mm | 36 W |
| Ø800 mm | 48 W |
| Ø1200 mm | 72 W |
| Ø1500 mm | 96 W |
| Ø1800 mm | 112 W |
30 × 35 mm section · Ra ≥ 82 · Constant-current standard. Constant-voltage configuration on request.
View ZG-3035 specifications ↗
Diffuse architectural shapes
Share your outline and preferred light direction. The catalog illustrates downward and side-emitting profile concepts. Confirm the minimum bend radius, segment joints, suspension points and driver location from the project drawing.
See the standard diffused ring options ↗
Catalog combination profiles list a base width greater than 40 mm and less than 300 mm. Double-layer profiles can accommodate an internal driver where the selected configuration allows. Confirm bending constraints before fabrication.
07 / Installed lighting
Explore project photography by room type. Each group shows how the position and shape of the light relate to the architecture and the way the space is used.
Parallel runs follow desk rows, while cross-shaped and angled layouts define shared seating and collaboration areas.
Linear fixtures follow the length of the table. The examples show slim suspended lines and recessed luminous panels coordinated with presentation equipment.
Angular grids, sweeping curves and long straight runs give large ceilings a recognizable pattern and help distinguish activity zones.
Repeated fixtures establish a rhythm along the route. Continuous light lines can turn from wall to floor or ceiling to highlight changes in plane.
Concealed light traces edges and wall returns. Visible lines can also become a feature in their own right, from a desk pendant to a wall with staggered vertical strips.
Linear lens series
Two linear lens designs for desks and executive offices. Share the mounting height and target area so the optical configuration can be matched to the project.
Project support
Share your drawing or BOQ, fixture quantities, mounting type, run lengths and control requirements.
