VOC LIGHTING / INDOOR ARCHITECTURAL
Build a base layer with recessed LED downlights and aim adjustable spotlights at merchandise, artwork or architectural details. Compare models for hotels, retail and commercial projects.
01 / FIXTURE SELECTION
Start with what you need to light. Check the beam, mounting details and driver for the model you select.
01
Choose a wider beam for ambient light in corridors and shared interiors. Check spacing with the selected optic.
10–40 W options · 60° / 90° beams · IP65
02
Aim the beam at displays, artwork or a feature surface. Choose the beam angle for the size of the target.
10 / 20 / 35 W · 15° / 24° / 36° / 55° beams
03
Use a trimless grille where the fixture needs to sit flush with the finished ceiling. Confirm the opening before fabrication.
CE-XTD-B-S06 linear grille downlight →
10 W · trimless recessed installation
04
Use asymmetric optics to light a vertical surface. Check the setback and spacing with the model’s light distribution.
Recessed asymmetric wall washer →
Recessed mounting · asymmetric distribution
02 / SPECIFICATION CHECK
CT-FS02 offers wide beams for general lighting. CT-FS04 adds narrower beam options for more defined accents. Both series list Ra90+ and optional dimming configurations.
Power 10 / 15 / 20 / 30 / 40 W
Beam angles 60° / 90°
Ceiling cut-outs Ø95 / 125 / 140 / 165 / 200 mm
Power 15 / 25 / 40 W
Beam angles 15° / 24° / 36° / 45° / 60°
Ceiling cut-outs Ø75 / 110 / 130 mm
Match the cut-out to the exact variant. For moisture-prone locations, confirm the fixture’s installation instructions and local project requirements.
03 / PROJECT PLANNING
A recessed downlight typically directs light downward for general illumination. An adjustable spotlight can be aimed at a specific object or surface. Beam angle determines how wide the light spreads in either case.
For corridors and other ambient areas, start with a wide-beam downlight and check spacing at the planned ceiling height. For merchandise or feature walls, compare an adjustable spotlight with a wall washer based on the area you want to highlight.
Record the ceiling cut-out and available recess depth, then confirm beam angle, color temperature, IP rating and driver or dimming protocol for the exact model. Include these details in your fixture schedule.
04 / PRODUCT LIST & QUOTE
Use Add to Quote List on the product cards below. Send the selected models, quantities and your bill of quantities (BOQ) or drawings in one request.
